Figure 27
Certificate Import Wizard window
4. On the Ce
rtificate Store window, click Yes to add the certificate.
5. Continue to click OK or Finish on each window that displays until the Command View VLS log in
window displays.
Restarting Command View VLS
To restart Command View VLS:
1. Under the System tab, select C hassis in the navigation tree.
2. Under Maintenance Tasks,selectSystem Maintenance.
3. Click Restart Command View VLS in the task bar.
The Restart Command View VLS window opens (Figure 28).
HP StorageWorks
57
To Next Page
Loading...
