Figure 52
Cartridges paramete rs wi ndow
6. Select t
he Select box next to ea ch cartridge that you want to delete. Select Select A l l if you want to
destroy all the car tridges listed.
7. Click De stroy S el ected.
8. Click Ye
s to confirm.
9. Click Finish.
NOTE:
Barcode numbers assigned to cartridges that have been destroyed can be reused. To reuse a barcode
number, do one of the following:
• Create
a new barcode template with the appr opriate values to use the barcode number(s).
• Delete the barcode template used to create the original cartridge(s), and then recreate the barcode
template w ith the appropr iate values to use the barcode number(s).
Adding and removing barcode templates
You can add and remove (delete), but not edit, cartridge barcode templates at any time.
NOTE:
Deleting a barcode template does not affect the cartridges that were created using it.
To add
or delete a barcode template:
1. Open a Command View VLS session and log in as the administrator. See Opening a Command
View VLS session from Command View TL.
84
Configuration
To Next Page
Loading...
