HP StorageWorks 300 - Virtual Library System EVA Gateway - Node Leds and Internal Health LED Combinations

Item
Description Status
7
PPM 1 failure
• Amber = PPM has failed.
• Off = PPM is operating normally.
8
PPM 2 failure
• Amber = PPM has failed.
• Off = PPM is operating normally.
9
Processor 2 failure
• Amber = Processor has failed.
• O ff = Processor is operating
normally.
10
Power supply signal connector
interlock failure
• Amber=Powersupplysignalcable
is not connected.
• Off = Power supply signal cable is
connected.
11
Standby power good
• Green =
Auxiliary power is applied.
• Off = Au
xiliar y power is not applied.
12
Power supply fan module failure
• Amber = One fan in this module has
failed.
• Red = Multiple fans in this module
have failed.
• O ff = All fans in this module are
operating normally.
13
System diagnostic
Refer to the HP Remote Lights-Out Edition
II User Guide.
14
Onl
ine spare memory
• Amber = Failover has occurred.
Online spare memory is in use.
• Green = Online spare memory is
enabled, but not in use.
• Off = On line spare memory is
disabled.
15
Riser interlock
• Amber = PCI riser assembly is not
seated.
• Off=PCIriserassemblyisseated.
Node LEDs and internal health LED combinations
When the internal he alth LED on the front panel of the node illuminates either amber or red, the node is
experiencing a health event. Combinations of illuminated system board LEDs and the internal health LED
indicate node status.
HP StorageWorks
123