HP StorageWorks 300 - Virtual Library System EVA Gateway - Edit the E-Mail Settings; Edit Email Settings Window

Edit the E-mai
lsettings
E-mail notifi
cation is sent to the persons you include on the E-mail d istribution list in the E-mail settings.
You specify t
he E-mail notifi cation alert severity a nd format settings for each person on the distribution list.
To create an E
-mail distribution list for notification alerts, add an E-mail address to the list, or remove an
E-mail address from the list:
1. Log in to Command View VLS as the administrator. See Opening a Command View VLS session
from Command View TL.
2. Click the N
otifications tab.
The Notifications window displays (Figure 66).
3. Click Edit Email Settings in the task bar.
The Edit Em
ail Settings window opens (Figure 68).
Figure 68 Edit Email Setting s window
4. To add an E-mail address:
a. Enter an E-mail address in the Email Address box.
b. Select the type of notification alerts to send in the Alerts box.
• All—Sends all notifications
• Errors—Sends only errors
• Warnings—Sends only warnings
• None—Sends no notifi cations
c. Select a notification alert format in the Format box.
• Short—Sends short mail messages
• Long—Sends detailed mail messages
• Long + Attac hment—Sends detailed mail messages and relevant log files
• Configuration—Saves the VLS configuration and E-mails it at midnight after any
configuration change.
d. Click Add.
e. To ad d another E-mail address, repeat these steps.
5. To d elete an E-mail address, click the Remove button for the E-mail address.
6. To test an E -mail address entr y, click Test Email.
HP StorageWorks
103