4. Click Delete Selected.
The notification alerts are deleted from the Notification window and can no longer be viewed.
E-mail notifica
tion
To receive VLS notification alerts by E-mail, you must edit the E-m ail server settings and then ed it the
E-mail settings.
Editing the E-mail server settings
NOTE:
You must enter the E-mail server settings before editing the E-mail settings.
To edit the E-mail server settings:
1. Open a Command View VLS session and log in as the administrator. See Opening a Command
View VLS session from Command View TL.
2. Click the Notifications tab .
The Notification s window displays (Figure 66).
3. Click Edit Mail Server Settings in the task bar.
The Edit Mail Server S ettings window opens (Figure 6 7).
Figure 67 Edit Mail Server Settings window
4. To add a mail server:
a. Enter the domain name for a mail server with an SMTP gateway that will process mail from the
VLS in the Outgoing Mail Server box.
b. If you want to change the From address , which defaults to administrator@<device
name>, type the preferred address in the Sender Email Address box.
c. Click Add.
d. To add another E-m ail server, repeat these steps.
5. To delete an E-mail server from the list, clic k the Remove button for the E-mail server.
102
Monitoring
To Next Page
Loading...
