8 Management
This section details the V LS management procedures. It is comprised of the following topics:
• Changing the account passwords
• Managing high availability
• Managing cartridges
• Unloading a cartridge from a drive
• Freeing up storage space
• Restarting the VLS device emulations
• Updating the software
•Savingconfiguration settings
Changing the account passwords
To change the administrator and/or user account password:
1. Open a Comma
nd View VLS session and log in as the administrator. See Opening a Command
View VLS se
ssion from Command View TL.
2. On the Sy s tem tab, select Chassis from the navigation tree.
3. Click Edit A ccounts under Maintenance Tasks.
The Edit Ac
counts window opens (Figure 54).
Figure 54 Edit Ac counts wind ow
4. Enter the current password in the Old Password box. The password is case sensitive.
5. Enter a new password in the New Password box.
6. Enter the new password again in the Retype New Password box.
7. Click Apply Settings.
Command View VLS restarts automatically.
HP StorageWorks
87
To Next Page
Loading...
