The Configured box for a device is checked if the device has an IP address.
The device type, host name, IP address (if available) , and serial number are displayed for each
device listed.
Figure 29 VLS discovery uti lity – ma in window
3. (Optional) To visually identif y a device listed, select the device from the list and click Beacon.This
will illuminate an LED on the device for the specified length of time.
In the case of the VLS, the UID LED button on the VLS node illuminates. See Front panel LEDs
and b utto
ns.
4. Select the VLS from the list of devices and click Configure.
The Device Configuration window opens (Figure 30).
62
Configuration
To Next Page
Loading...
