HP StorageWorks 300 - Virtual Library System EVA Gateway - Opening a Command View VLS Session from Command View TL; Installing the SSL Certificate into Your Web Browser

The default administrator password is admin.Thedefaultuserpasswordisguest.Thepassword
is case sensitive.
6. Click Login.
Opening a Command View VLS session from Command View TL
NOTE:
Before you can open a Command View VLS session from Command View TL, you must first install
Command View T
L on a PC or w orkstation and then add the VLS to Command View TL. See the
HP
OpenView Command View for TL User Guide
for in structions.
Command View TL gives you the ability to manage and license multiple virtual and physical tape libraries
from a single management application.
To open a Command View VLS session from Command View TL:
1. Start Command View TL.
2. From the Library Selection tab of the Launcher window, double-click the VLS from the list of libraries.
3. If a Security Alert window opens and prompts you to acce pt the Secure Sockets Layer (SSL) certi ficate,
install the SSL certificate as described in Installing the SSL c er tifi cate into your web br owser.
The first time you open a Command View VLS session (and the first time you open a Command View
VLS session af ter changing the fully qualified name of the VLS), a Security Alert window opens and
prompts you to accept the Secure Sockets Layer (SSL) certificate.
4. Enter administrator or user in the Username box. The username is case sensitive.
NOTE:
LogginginasadministratorgivesyoufullprivilegestoallVLSfunctionsavailable
through Command View VLS. Logging in as a user gives you only viewing and cartridge
management privileges.
5. Enter the appropriate password in the Password box for the username entered.
The default administrator password is admin.Thedefaultuserpasswordisguest.Thepassword
is case sensitive.
6. Click Login.
Installing the SSL certificate into your web browser
The first time you open a Command View VLS session (and the first tim e you open a Command View VLS
session
after changing the fully qualified name of the VLS), a Security Alert window opens and prompts
you to a
ccept the Secure Sockets Layer (SSL) certificate.
Install the SSL certificate into your web browser:
1. Click Yes.
54
User interfaces