HP StorageWorks 300 - Virtual Library System EVA Gateway - Create Virtual Library Wizard Window (8 of 12)

Figure 44 Create Virtual Library Wizard window (8 of 12)
3. To add a barc
ode template:
a. Enter the barcode prefix(onetofive alpha characters) in the Barcode Prefix box.
b. Enter the number of digits for the barcode number in the Digit Length box.
c. Enter the b
arcode suffix (one to two alpha characters) in the Barcode Suffix box.
d. Enter the starting barcode number in the Starting # box.
e. Click Add to add the new barcode template.
f. To add ano
ther barcode template, repeat these steps.
4. Click the radio button next to the barcode template you want to use to create the cartridges.
NOTE:
Select a six character (or less) barcode number if your back up application is Veritas
Netbacku p. Veritas Netback up has a six character barcode number limit.
5. Click Next Step.
6. Select the type of p hysical cartridge to emulate (Figure 45).
7. Click Next Step.
78
Configuration