HP StorageWorks 300 - Virtual Library System EVA Gateway - Add;Remove Barcode Templates Window

2. Click the System tab.
3. Select Cartridges in the navigation tree.
4. Click Add/Remove Barcode Tem plates in the task bar.
The Add/Remove Barcode Templates window opens (Figure 53).
Figure 53 Add/Remove Barcode Templates win d ow
5. To delete a barcode template, click the Remove button for the barcode template.
The window refreshes when the deletion operation is finished.
6. To add a barcode template:
a. Enter the barcode prefix(onetofive alpha characters) in the Barcode Prefix box.
b. Enter the number of digits for the barcode number in the Digit Length box.
c. Enter the barcode suffix (one to two alpha characters) in the Barcode Suffix box.
d. Enter the starting barcode number in the Starting # box.
e. Click Add to add the new barcode template.
f. To add another barcode template, repeat these steps.
HP StorageWorks
85