HP StorageWorks 300 - Virtual Library System EVA Gateway - Create Virtual Library Wizard Window (12 of 12); Destroying a Virtual Library

Figure 47 Create Virtual Library Wizard window (11 of 12)
10. Click Next.
Figure 48 Crea te Virtua l Librar y Wi zard window (12 of 12)
11 . Click Return.
The System tab window opens. You can now select the new library, tape drive(s), and cartridges in
the navigation tree to view their configuration information, such as their default LUN numbers.
Destroying a virtual library
NOTE:
Destro
ying a virtual library may create a gap in the default L UN numbering on the FC host port to
which
it was mapped. If a gap is created, restart the VLS device emulations to remove the gap. See
Restarting the VLS device emulations.
Most o
perating systems will ignore (cannot access) any virtual devices with LUN numbers that follow a
gap in the LUN numbering on an FC host port.
80
Configuration