Figure 45 Create Vir tual Libra ry Wizard win dow (9 of 12)
8. Enter the number of cartridges and the cartridge size in the appropriate boxes (Figure 46).
The d efault number of cartridges is based on the maximum number of slots configured for the virtual
library.Thedefaultcartridgesizeisbasedontheactualsizeofthetypeofcartridgeemulated.
If there are multiple storage pools on your system, you must select the po ol in which to create
cartridges from the —> Available capacity drop-down box.
The system calculates and displays the a m ou nt of required storage. If the required storage exceeds
what is available, the overage appears in red. You can allow the oversubscription of storage
capacity (see Enabling and disabling oversubscription), or you can change either the number of
cartrid
gesorthecartridgesize(orboth)tocorrecttheoveragecondition.
Figure 46 Create Virtual Library Wizard window (10 o f 12)
9. Click Next Step.
Asum
mary window opens and displays details about the cartridges you created (Figure 47).
HP StorageWorks
79
To Next Page
Loading...
