Figure 39 Create Virtual Library Wizard window (3 of 12)
12. Click Create Library.
A summary window opens and displays details about the library emulation created (Figure 40).
Figure
40 Create Virtual Lib rary Wizard window (4 of 12)
13. Choose
one of the following options:
• To perform LUN mapping for the virtual library, click Map LUNs and proceed to LUN
mapping for further instructions.
• T o continue creating the virtual library , click Create Tape Drive(s) and proceed to Creating
tape d
rives.
•Toexitthewizard,clickCancel.
The library is created but does not contain any tape drives or car tridges. You can add tape
driv
es and ca r tridges later.
74
Configuration
To Next Page
Loading...
