HP StorageWorks 300 - Virtual Library System EVA Gateway - Setting the User Preferences; Set Network Configuration Wizard Window

4. Current network confi guration, NTP settings, and time zone sett ings are displayed. Modify these as
needed (Figure 31).
Figure 31 Set Network Configuration Wizard window
5. Click Finish to apply the settings.
NOTE:
The system automatically reboots after any change.
Setting the user pref erences
Setting the user preferences allows you to:
• Set the frequency at which the system state is checked and the browser is refreshed
• Add the VLS administrator’s name, company, mail, and phone number, and the VLS location
to the Identity tab window
• Set the maximum number of notification alerts to store
To set the user preferences:
1. O pen a Command View VLS session and log in as the administrator. See Opening a Command
View VLS session from Command View TL.
2. From the System tab, select Chassis in the navigation tree.
3. Click User Preferences under M a intenance Tasks.
The User Preferences window opens (Figure 32).
HP StorageWorks
65