HP StorageWorks 300 - Virtual Library System EVA Gateway - Page 117

Command
Usage
1
addEmail
Adds an mail address and desired report formatting to
the mail notification alert settings. Where the options
are:
-a <s> - E-mail address (required)
-c <s> - VLS IP address (required)
-f <n> -Frequency(0-Never,1-Daily,2-Weekly,or
4-Monthly) (optional)
-s <n> - Severity (1-Error, 2-Warning, 4-Info, or
8-Unknown) (optional)
-y <n> - E-mail type (1-Long with attachment,, 2-Long,
4-Short, or 8-Reports) (optional)
-h - Displays command usage information (optional)
getEmail
Returns the re
port settings for each mail address
configured for notific ation alerts.
deleteEmail
Deletes the specified mail address from the mail
notification alert settings. Where the options are:
-a <s> - E-mail address (required)
-c <s> - VLS node IP address (required)
-f - Force. Do the delete without a prompt (optional)
-h - Displays command usage information (optional)
addSnmpServer
Specifies an SNMP management console to receive
SNMP traps from the VLS. Where the options are:
-a <s> - SNMP server IP address (required)
-c <s> - VLS node IP address (required)
-m <s> - Community (Public, ...) (required)
-v <s> - Trap version (required)
-h - Displays command usage information (optional)
getSnmp
Returns the
SNMP management console configuration
settings for notification alerts.
deleteSnmpServer
Deletes the specified SNMP management console
from the SNMP notification alert settings. Wher e the
options are:
-a <s> - SNMP server IP address (required)
-c <s> - VLS node IP address (required)
-f - Force. Do the delete without a prompt (optional)
-h - Displays command usage information (optional)
1
<s>=string;<n>=number;<f>=filena me
HP StorageWorks
117