HP StorageWorks 300 - Virtual Library System EVA Gateway - Page 43

1. Create a storage pool(s):
a. Open a Command View VLS session and log in as the administrator. See Opening a Command
View VLS session from Command View TL.
b. In the Storage tab navigation tree, select Storage Pools.
c. From the task bar, select Create Storage Pool .TheCreate Storage Pool Wizard is displayed.
d. Click Finish. CREATE STORAGE POOL COMPLETED is displayed.
e. Click Return.
f. If you a
re creating a separa te storage pool for each array, repeat this process for ea ch storage
pool.
2. Add the array LUNs to the storage pool(s).
a. Open a
Command View VLS session and log in as the administrator. See Opening a Command
View V
LS session from Command View TL.
b. In the Storage tab nav igation tree, under Storage Pools, select a storage pool.
c. From the task bar, select Add E xternal LUN.TheAdd External LUN Wizard is displayed.
NOTE:
This task does not appear if there are no l icenses available.
d. From the list of available unconfig ured LUNs, select the LU N s to add to the pool. (By default, all
LUNs are selected.)
NOTE:
View the WorldWideUniqueLunIDon the storage LUN list (on the System scr een)
to identify which LUNs are associated with each array.
e. Use the Format check box to indicate whether the selected LUNs are initialized (formatted)
when added to the pool.
HP StorageWorks
43