HP StorageWorks P9000 - Disk Arrays User Manual

Table 46 Error codes (part code 5205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WClick [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
The number of reserved volume that can
be set in the storage system exceeds the
maximum. The configuration information
on such as a volume (LDEV) displayed
on the window might be out of date.
10845205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume(s) are already used by Auto
LUN.
10855205
WCheck the micro program version, and
please contact HP Technical Support.
The RAID level of the target volume is not
supported.
10865205
WRetry the operation after the format is
completed.
The volume specified as a migration
target is being formatted.
10875205
WSpecify another volume.The volume specified as a migration
source cannot be migrated, because it
is already used as a reserved volume of
Business Copy Z, Business Copy, or Auto
LUN.
10885205
WClick [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
The specified volume is not a reserved
volume. The configuration information
on such as a volume (LDEV) displayed
on the window might be out of date.
10945205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The number of the reserved volumes
exceeds the maximum number that can
be assigned.
10955205
WExecute the vary offline command to
disable the volume from the mainframe
host, then retry the operation.
The command has been rejected,
because the volume specified as a target
volume or a reserved volume is used by
the host.
10965205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
Auto LUN does not support the volume(s).11095205
WSpecify another volume.The volume specified as a migration
source is already used as a volume of
Concurrent Copy.
11175205
WSpecify another volume.The volume specified as a migration
target is already used as a volume of
Concurrent Copy.
11185205
WSpecify another volume.The volume(s) is already being used by
Concurrent Copy.
11195205
WSpecify another volume.The volume specified as a migration
source is already used as a volume of
Compatible XRC.
11205205
WSpecify another volume.The volume specified as a migration
target is already used as a volume of
Compatible XRC.
11215205
WSpecify another volume.The volume(s) is already being used by
Compatible XRC.
11225205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume types do not match.12075205
116 Message (part code group 5nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English