Table 46 Error codes (part code 5205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume(s) are already used by Auto
LUN.
12215205
WSee Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide if the volumes of Business Copy
Z or Business Copy can be migrated.
The number of the Business Copy Z or
Business Copy pair volumes has reached
the maximum.
12225205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume(s) are already used by Auto
LUN.
12235205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume(s) are already used by Auto
LUN.
12245205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The selected source volume and
destination volume are the same volume.
12255205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume(s) is already being used by
Remote Copy.
12265205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The volume(s) is already being used by
Remote Copy.
12275205
WRetry the same operation. If nothing
changes, please contact HP Technical
Support.
The RAID level of the target volume is not
supported.
12285205
WSee "Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide if the volumes of Business Copy
Z or Business Copy can be migrated.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
12295205
WSee "Supported and prohibited source
and target volumes" in the HP
StorageWorks P9000 Performance for
Open and Mainframe Systems User
Guide if the volumes of Business Copy
Z or Business Copy can be migrated.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
12305205
WRelease the Data Migration.The volume(s) is already being used by
Data Migration.
12315205
WSpecify another volume.The specified volume(s) are already used
by Business Copy Z or Business Copy.
12325205
WSpecify another volume.The specified volume(s) are already used
by Business Copy Z or Business Copy.
12335205
WSpecify another volume.The volume specified as a migration
target cannot be migrated, because it is
used as P-VOL of Continuous Access
Synchronous, or Continuous Access
Synchronous Z.
12345205
118 Message (part code group 5nnn)