HP StorageWorks P9000 - Disk Arrays User Manual

Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the same error occurs despite retrying,
please contact HP Technical Support.
This error code is not registered.73106505
ERetry the operation. If this problem
persists, please contact HP Technical
Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
80006505
WWait a while, then retry the operation.A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
80016505
WWait a while, then retry the operation.A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
80026505
ERetry the operation. If this problem
persists, please contact HP Technical
Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
81006505
ECheck whether the DKCMAIN microcode
version and the SVP microcode version
are mismatched.
This function is not supported.81026505
WRetry the operation.Please retry operation.87006505
WCheck the path status and edit the path
again.
The logical path between the local and
the remote subsystems is invalid.
87016505
WRefresh and check the window. If
possible, retry the operation on the
primary data volume.
The status of the primary data volume is
not valid.
87026505
WCheck the number of paths.The specified number of paths is less
than the minimum number of paths in the
DKC Option window.
87036505
WCheck the path status in the DKC Status
window, then restore the paths.
The specified number of paths is less
than the minimum number of paths in the
DKC Option window, due to a
communication error between the local
and the remote storage systems.
87046505
ECheck the CHA status on the window. If
the CHA is blocked, replace the CHA,
then retry the operation.
The path could not be deleted due to a
communication error between the local
and the remote subsystems.
87056505
WEnter the correct data.Parameter specified by Remote Copy
operation is invalid.
87066505
WRefresh the window, and check the pair
status. If possible, retry the operation on
the secondary data volume.
The pair status of the secondary data
volume is incorrect.
87086505
EReplace the channel adapter, then retry
the operation.
Remote Copy operation was rejected.87096505
WRefresh the window, and check the pair
status of the pair. If the pair status can
be manipulated, retry the operation.
The pair status of the specified data
volume is incorrect.
87106505
WCheck the port number, ID, and LUN of
the storage system.
The specified parameter is incorrect.87116505
166 Message (part code group 6nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English