Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck whether the specified secondary
data volume is used by Concurrent
Copy, XRC Replication or any of the
following program products:
• Business Copy Z
• Continuous Access Synchronous Z
• Compatible FlashCopy
• Auto LUN
The specified secondary data volume is
used by Concurrent Copy, Compatible
XRC or another program product.
582986505
WCheck the configuration of the specified
volume.
The specified volume is used as a
command device.
583026505
WCheck the configuration of the specified
volume.
A path is defined to the specified
volume.
583056505
WCheck the configuration of the specified
secondary data volume.
The specified secondary data volume is
used as a command device.
583066505
WCheck the configuration of the specified
secondary data volume.
The specified secondary data volume is
an On-Demand (Just in Time) volume.
583076505
WCheck the configuration of the primary
data volume.
The specified primary data volume is
used as a command device.
583086505
WConfirm the controller type of the RCU.The Add Pair (Paircreate) operation
failed because the specified primary
data volume was a P-VOL of Continuous
Access Synchronous or an M-VOL of
Continuous Access Synchronous Z.
583246505
WCheck the status of the specified primary
data volume in the Continuous Access
Synchronous or the Continuous Access
Synchronous Z window.
If the primary data volume is in PSUS,
PSUE or Suspend status, restore the
volume, then retry the operation.
If the primary data volume is in COPY
or Pending status, retry the operation
after the status of the volume changes to
PAIR or Duplex.
The specified primary data volume is
used by Continuous Access Synchronous
or Continuous Access Synchronous Z.
The operation failed because the status
of the Continuous Access Synchronous
pair, or the Continuous Access
Synchronous Z pair was inappropriate.
583256505
WSpecify another primary data volume,
and retry the operation.
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was shared by Continuous
Access Synchronous (or Continuous
Access Synchronous Z) and Business
Copy (or Business Copy Z).
583266505
WSpecify another primary data volume,
and retry the operation.
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was an LUSE volume.
583276505
EPlease contact HP Technical Support.The operation of Add Pair (Paircreate)
or Resume Pair (Pairresync) cannot be
performed, because the data are
remained in the journal cache for the
restore journal.
583286505
Part code 6505 181
To Next Page
Loading...
