HP StorageWorks P9000 - Disk Arrays

Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait for a while, and refresh the
window. If this message is displayed
after a setting operation, check whether
the setting is reflected. When the setting
is not reflected, retry the operation.
The storage system has accepted the
request normally, however the processing
requires some time. If this message is
displayed after a setting operation,
please refresh the window and check
whether the setting is reflected. If the
setting is not reflected despite refreshing
the window, please retry the operation.
585936505
WCheck the LUSE volume configuration of
the primary data volume and the
secondary data volume.
The Paircreate operation failed because
the configuration of the LUSE volume was
different between the primary data
volume and the secondary data volume.
585946505
WConfirm that the Continuous Access
Journal function of the secondary storage
system supports LUSE volumes.
The Paircreate operation failed because
the Continuous Access Journal function
of the secondary subsystem does not
support LUSE volumes.
585956505
WCheck if the At-Time Split is set to the
specified restore journal with Business
Continuity Manager.
The operation to change the status to the
status ready for Delta resync failed
because At-Time Split was set to the
specified restore journal.
585966505
WCheck the controller ID of the specified
serial number.
Journals cannot be added to the
extended consistency group (EXCTG),
because the controller ID of the specified
serial number is invalid.
585976505
WConfirm that the Continuous Access
Journal Z function and the Disaster
Recovery Extended function are installed
in the storage system.
Journals cannot be added to the
extended consistency group (EXCTG),
because Continuous Access Journal Z
function or Disaster Recovery Extended
function is not installed.
586006505
WPlease contact HP Technical Support and
install additional shared memory.
Journals cannot be added to the
extended consistency group (EXCTG),
because the additional shared memory
is not installed.
586016505
WCheck the number of storage systems in
the specified extended consistency group
(EXCTG).
Journals cannot be added to the
extended consistency group (EXCTG),
because the number of storage systems
in the EXCTG exceeds the maximum.
586026505
WCheck the number of journals in the
specified extended consistency group
(EXCTG).
Journals cannot be added to the
extended consistency group (EXCTG),
because the number of journals in the
EXCTG exceeds the maximum.
586036505
WCheck the number of journals in the
specified extended consistency group
(EXCTG).
The specified journal is already
registered in the extended consistency
group (EXCTG).
586046505
WCheck the mirror ID of the specified
extended consistency group (EXCTG).
Journals cannot be added to the
extended consistency group (EXCTG),
because the specified mirror ID is
different from the mirror ID existed in the
EXCTG.
586056505
WCheck the status of the specified
extended consistency group (EXCTG).
Journals cannot be deleted from the
extended consistency group (EXCTG),
because the specified EXCTG is not
registered.
586066505
188 Message (part code group 6nnn)