Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe master journal group of the specified
primary data volume runs on the 2DC
configuration in which the Continuous
Access Synchronous cooperates.
Delete the Continuous Access
Synchronous pair volume or suspend it.
The Pairresync operation failed because
the specified primary data volume was
one of the following.
• The volume was not used by
Continuous Access Synchronous.
• The volume was used by Continuous
Access Synchronous, but the pair
status was not PSUS or PSUE.
687846505
WCheck the status of the specified M-VOL
from the host or the SVP.
The M-VOL cannot be used because
M-VOL is a volume of FICON(R) Data
Migration.
688046505
WCheck the status of the specified R-VOL
from the host or the SVP.
The R-VOL cannot be used because
R-VOL is a volume of FICON(R) Data
Migration or Data Migration.
688056505
WSpecify a volume that is not used by
FICON(R) Data Migration.
The specified volume cannot be used as
a journal volume because it is used by
FICON(R) Data Migration.
688116505
WCheck each capacity of the primary data
volume and the secondary data volume
after the capacity change of secondary
data volume ends. Plan a combination
of volumes for pair creating.
A pair could not be created because the
specified secondary data volume was a
Thin Provisioning volume whose capacity
was being changed.
688126505
WCheck each capacity of the primary data
volume and the secondary data volume
after the capacity change of primary
data volume ends. Plan a combination
of volumes for pair creating.
A pair could not be created because the
specified primary data volume was a
Thin Provisioning volume whose capacity
was being changed.
688136505
WThe specified volume runs on the 2DC
configuration in which the Continuous
Access Synchronous cooperates.
Release the pair of Continuous Access
Synchronous, then retry the operation.
The pair cannot be released because the
specified volume is used as the pair
volume of Continuous Access
Synchronous.
688156505
WRetry the operation after the completion
of discarding zero data on the specified
volume.
The operation failed, because the
specified secondary data volume was a
volume of Thin Provisioning whose zero
data was being discarded.
688426505
WRetry the operation after the completion
of discarding zero data on the specified
volume.
The operation failed, because the
specified primary data volume was a
volume of Thin Provisioning whose zero
data was being discarded.
688436505
WWait until the initializing process is
completed, then retry the operation.
The operation failed, because the
specified primary data volume was
being initialized by Business Copy or
Business Copy Z.
688486505
WWait until the initializing process is
completed, then retry the operation.
The operation failed, because the
specified secondary data volume was
being initialized by Business Copy or
Business Copy Z.
688496505
Part code 6505 201
To Next Page
Loading...
