HP StorageWorks P9000 - Disk Arrays User Manual

Table 55 Error codes (part code 6510) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iEnsure that the associated channel paths
are offline.
Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
90246510
iRemove the remote copy paths that are
associated with the ports.
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
90256510
iTo continue to change ports, click [OK].Are you sure you want to switch the
ports?
If any remote copy paths exist on the
ports, delete them beforehand.
Also, to avoid the switching operation
from being reported as a failure, confirm
first that a message prompting you to
change the channel cable connections
is displayed, and then perform the
necessary changes.
90266510
iTo close the window, click [OK].
Otherwise, click [Cancel].
Do you want to exit?91006510
iTo cancel the operation, click [OK].Do you want to cancel?91016510
iTo apply settings in Preview to the disk
storage system, click [OK].
Do you want to apply?91026510
iTo switch the mode, click [OK].
Otherwise, click [Cancel].
Do you want to change the mode?91046510
WTo discard the current settings and close
the window, click [OK]. Otherwise, click
[Cancel].
The value that is under setup is not
reflected yet. Do you want to exit?
91056510
WTo discard the current settings and switch
to View mode, click [OK]. Otherwise,
click [Cancel].
The value that is under setup is not
reflected yet. Do you want to change the
mode?
91066510
WTo discard the current settings and
refresh the window, click [OK].
Otherwise, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
91076510
WTo discard the current settings, click
[OK]. Otherwise, click [Cancel].
Do you want to delete the specified line
of settings from the Preview list?
91116510
iTo continue the current operation, click
[OK]. Otherwise, click [Cancel].
Do you want to continue this operation?91126510
iClick [OK].The monitoring was stopped by another
operator. The graph will be closed.
91156510
iClick [OK].Another operator has changed the
Gathering Interval value. The graph will
be closed.
91166510
WTo close the graph, click [OK].
Otherwise, click [Cancel].
Are you sure you want to close the
graph?
91176510
iTo apply this setting, click [OK]. If you
want to change the setting, click
[Cancel].
Please check the specified value.91186510
WSelect a graph item.No graph item has been selected. Please
select a graph item.
91196510
Part code 6510 205

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English