Table 56 Error codes (part code 6610) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iClick [OK].SIMs of Continuous Access Journal and
Continuous Access Journal Z are cleared.
90086610
iClick [OK].The export is complete.90096610
iTo continue processing, click [Yes]. If the
processing finishes, reconfigure the port
that is not in operation.
The Port Setting process has not
completed. Do you want to continue for
other ports?
90216610
iEnsure that the associated channel paths
are offline.
Are you sure you want to exchange the
specified ports? Please confirm the
associated channel paths are off-line.
90246610
iRemove remote copy paths that are
associated with the ports.
Are you sure you want to switch the
ports? If the remote copy paths exist on
the ports, delete them beforehand.
90256610
WTo continue to change ports, click [OK].Are you sure you want to switch the
ports?
If any remote copy paths exist on the
ports, delete them beforehand.
Also, to avoid the switching operation
from being reported as a failure, confirm
first that a message prompting you to
change the channel cable connections
is displayed, and then perform the
necessary changes.
90266610
iTo close the window, click [OK].
Otherwise, click [Cancel].
Do you want to exit?91006610
iTo cancel the operation, click [OK].Do you want to cancel?91016610
iTo apply settings in the Preview list to
the storage system, click [OK].
Do you want to apply?91026610
iTo apply settings in the Preview list to
the storage system, click [OK].
Do you want to change the mode?91046610
WTo discard the current settings and close
the window, click [OK]. Otherwise, click
[Cancel].
The value that is under setup is not
reflected yet. Do you want to exit?
91056610
WTo discard the current settings and switch
to View mode, click [OK]. Otherwise,
click [Cancel].
The value that is under setup is not
reflected yet. Do you want to change the
mode?
91066610
WTo discard the current settings and
refresh the window, click [OK].
Otherwise, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
91076610
WTo discard the current settings, click
[OK]. Otherwise, click [Cancel].
Do you want to delete the specified line
of settings from the Preview list?
91116610
iTo continue the current operation, click
[OK]. Otherwise, click [Cancel].
Do you want to continue this operation?91126610
WTo clear SIMs, click [Yes]. Otherwise,
click [No].
Are you sure you want to clear SIMs of
Continuous Access Journal and
Continuous Access Journal Z?
91136610
iClick [OK].The monitoring was stopped by another
operator. The graph will be closed.
91156610
212 Message (part code group 6nnn)
To Next Page
Loading...
Need help?
General