Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait a while, and retry the operation.The command has been rejected,
because the command specified last time
is being processed.
85017005
WDelete the Remote Copy pair.You cannot reserve the volume, because
a remote copy pair exists in the same
subsystem frame.
85027005
WDelete the Remote Copy pair.You cannot create the new pair, because
a remote copy pair exists in the same
subsystem frame.
85037005
WConfirm the composition, the status, or
the volume status of the pair. (See the
HP StorageWorks P9000 Business Copy
User Guide for the relation between the
composition of the pair, status of the
pair, or the volume status of the pair and
those operations.)
The command was rejected. Check the
composition, the status, or the volume
status of the pair.
85047005
ESee the section "Operations permitted
for L1, L2 pairs" in the HP StorageWorks
P9000 Business Copy User Guide for
the relation between the status of pairs
and the commands that can be
accepted.
The command has been rejected,
because the operation cannot be
accepted in the current pair status.
85057005
WVary the S-VOL or the reserved volume
offline from the mainframe host, then
issue the command again.
The command has been rejected,
because the specified S-VOL or reserved
volume is used by the host.
85067005
WYou cannot execute the Pairsplit
command because the pair is already in
the PSUS status.
The Pairsplit command was issued to the
pairs in a PSUS status.
85077005
WYou cannot execute the Pairsplit
command because the pair is already in
the PSUS status.
The Paircreate command was issued to
the pairs in a PSUS status.
85087005
WCheck the contents, and retry.The Split command with the QUIESCE
specification was issued to a secondary
boot device.
85097005
WCheck the contents, and retry.The M-VOL Suspend command was
issued to a secondary boot device.
85107005
WDetach the S-VOL from the host, or delete
the Remote Copy path.
You cannot reserve the volume, because
a path group is set.
85117005
WDetach the S-VOL from the host, or delete
the Remote Copy path.
Cannot perform Pairresync or Pairsplit-E
operation because of the path group
setting.
85127005
WVary the P-VOL offline from the
mainframe host, then issue the command
again.
The command has been rejected,
because the specified P-VOL is used by
the host.
85137005
WDelete the Reserve volume.No reserved volume can be allocated.85147005
WCheck the contents, and retry.The number of cylinders in the reserved
volume exceeds the maximum.
85157005
WCheck the contents, and retry.The number of P-VOL cylinders exceeds
the maximum.
85167005
Part code 7005 223
To Next Page
Need help?
General