HP StorageWorks P9000 - Disk Arrays User Manual

Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the contents, and retry.The number of S-VOL cylinders exceeds
the maximum.
85177005
WCheck the emulation type.You cannot create a pair, because the
track format is different for each. Make
sure that the specified emulation type is
the same for both.
85187005
WSelect volumes with the same capacity.
When specifying LUSE volumes as P-VOL
and S-VOL, the capacity of each volume
constituting the LUSE volumes must be
the same.
Volumes specified as P-VOL and S-VOL,
or those constituting LUSE are not
consistent in capacity.
85197005
WSpecify the volume of the same emulation
type, and retry the operation.
You cannot set a pair, because the
volume type is different for each.
85207005
WCheck the contents, and retry.The number of multiple copy jobs
exceeded the maximum.
85217005
WSpecify the emulation type supported in
HOMRCF.
The emulation type of the P-VOL is not
supported.
85227005
WSpecify the emulation type supported in
HOMRCF.
The emulation type of the S-VOL is not
supported.
85237005
WSpecify the emulation type supported in
HOMRCF.
The emulation type is not supported.85247005
EPlease contact HP Technical Support.An internal logic error occurred.85257005
EPlease contact HP Technical Support.An internal logic error occurred.85267005
EPlease contact HP Technical Support.An internal logic error occurred.85277005
EPlease contact HP Technical Support.An internal logic error occurred.85287005
EPlease contact HP Technical Support.An internal logic error occurred.85297005
EPlease contact HP Technical Support.An internal logic error occurred.85307005
EPlease contact HP Technical Support.An internal logic error occurred.85317005
WStop the usage by the host.The command has been rejected,
because the P-VOL or the S-VOL is being
used by the host.
85327005
WSpecify a volume of the supported
emulation type. When the S-VOL is used
as a data volume of Continuous Access
Journal, the command cannot be
executed in the current status of
Continuous Access Journal pair.
See the section "Sharing Business Copy
volumes" in the HP StorageWorks P9000
Business Copy User Guide for the
relation between the status of Continuous
Access Journal pair and the Business
Copy operations.
The command has been rejected,
because the emulation type of the
specified volume is not supported or the
specified S-VOL is used as a data volume
of Continuous Access Journal.
85337005
EPlease contact HP Technical Support.A processor failure was detected.85357005
EPlease contact HP Technical Support.A cache failure was detected.85367005
EPlease contact HP Technical Support.The cache capacities do not match.85377005
224 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English