Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the RAID level, and specify a
volume of the supported RAID level, then
retry the operation.
The RAID level of the specified volume
is not supported.
86007005
WCheck the contents, and retry.The specified P-VOL cannot be paired
with a backup server volume.
86017005
WThe volume used as S-VOL of the other
pair cannot be used as P-VOL.
The command has been rejected,
because the specified P-VOL has already
been used as S-VOL of the other pair.
86027005
WCheck the pair status.The Pairresync command was issued to
a device in the SMPL status.
86057005
WWhen the P-VOL of L1 pair is used as
the P-VOL of Continuous Access
Synchronous pair, L2 pair cannot be
created.
The operation to create L2 pair has been
rejected, because the P-VOL of L1 pair
is used as the P-VOL of Continuous
Access Synchronous pair.
86067005
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the Business Copy User
Guide for the relationship between the
state of the Continuous Access
Synchronous pair and the Business Copy
operations.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair.
86077005
WRefresh the window, and retry the
operation.
The specified S-VOL is not defined.86087005
WCheck the contents, and retry.The specified volume is not set as a
reserved volume.
86097005
WRelease the Auto LUN setting.The S-VOL is a target volume for Auto
LUN.
86107005
WCheck the volume status.The specified volume is an S-VOL.86117005
WCheck the volume status.The specified volume is not an S-VOL.86127005
WSpecify the volume number of the
supported RAID level.
The RAID level of the specified S-VOL is
not supported.
86137005
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the Business Copy User
Guide for the relationship between the
state of the Continuous Access
Synchronous pair and the Business Copy
operations.
The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair.
86147005
WThe S-VOL of Continuous Access
Synchronous pair cannot be used as
S-VOL of Business Copy.
Specify another volume.
The command has been rejected,
because the specified S-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
86157005
WCheck the volume number.The S-VOL is already defined as a P-VOL.86187005
228 Message (part code group 7nnn)
To Next Page
Loading...
Need help?
General