HP StorageWorks P9000 - Disk Arrays User Manual

Table 61 Error codes (part code 7010) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iAn error occurred during the indicated
operation. See the error code for each
operation in the Preview list.
An error occurred. Check the error code.90057010
iTo cancel, click [OK].Do you want to cancel?91017010
iClick [OK] to execute the operation.Do you want to apply?91027010
iTo continue processing, click [OK].
Otherwise, click [Cancel].
The option has been changed. If you
continue processing before applying the
change, the option will be reset to the
current setting. Do you want to continue
processing?
91087010
WTo continue processing, click [OK].
Otherwise, click [Cancel].
Do you want to execute the Initialize
operation?
91107010
iCheck the device emulation and the
definition of the SCSI path.
There are no valid volumes.93037010
WCheck the selected S-VOLs.The selected S-VOLs include a volume or
volumes that is/are paired.
550037010
WCorrect the number of selected P-VOLs
and S-VOLs.
The number of selected P-VOLs doesn't
match the number of selected S-VOLs.
Correct the number of selected P-VOLs
and S-VOLs.
550047010
WTo continue the operation, click [OK].The CLPR used for the P-VOL differs from
the CLPR used for the S-VOL. Do you
want to continue this operation?
590007010
EClick [Cancel], then please contact HP
Technical Support.
The P-VOL and the S-VOL belong to
different SLPRs. Do you want to continue
this operation?
590487010
EPlease contact HP Technical Support.The P-VOL and the S-VOL belong to
different SLPRs. If you perform this
operation, the storage partition
administrator will become unable to
operate.
Do you want to continue this operation?
590697010
WClick [OK], then continue the operation.Information was updated by other users.
The list will scroll to the top.
661027010
WChange the number of pairs or volumes
displayed in Preview to 16,384 or less.
The maximum number of Pairs or
Volumes that can be displayed in the
Preview List is 16,384. Change the
number of pairs or volumes that is
displayed in the Preview List to 16,384
or less.
665607010
WChange the status of the excluded pair.
Pairsplit operation cannot be executed
from Remote Web Console, if the
specified pair is a Snapshot pair.
Some pairs are excluded from the pairs
to be set, because pairs in invalid status
for Pairsplit operation or Snapshot pair
is included in the specified pairs.
690257010
240 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English