HP StorageWorks P9000 - Disk Arrays User Manual

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WYou cannot execute the Split Pair
operation because the pair is already in
the Split status.
The Split Pair command was issued to
the pairs in the split status.
85077105
WYou cannot execute the AddPair
operation to the pairs in the Split status.
The AddPair command was issued to the
pairs in the Split status.
85087105
WCheck the contents, and retry.The Split command with the QUIESCE
specification was issued to a secondary
boot device.
85097105
WCheck the contents, and retry.The M-VOL Suspend command was
issued to a secondary boot device.
85107105
WDetach the S-VOL from the host, or delete
the Remote Copy path.
You cannot reserve the volume, because
a path group is set.
85117105
WDetach the S-VOL from the host, or delete
the Remote Copy path.
Cannot perform Resync or Suspend
operation because of the path group
setting.
85127105
WVary the S-VOL offline from the
mainframe host, then issue the command
again.
The command has been rejected,
because the specified S-VOL is used by
the host.
85137105
WDelete the Reserve volume.No reserved volume can be allocated.85147105
WCheck the contents, and retry.The number of cylinders in the reserved
volume exceeds the maximum.
85157105
WCheck the contents, and retry.The number of S-VOL cylinders exceeds
the maximum.
85167105
WCheck the contents, and retry.The number of T-VOL cylinders exceeds
the maximum.
85177105
WCheck the emulation type.You cannot create a pair, because the
track format is different for each. Make
sure that the specified emulation type is
the same for both.
85187105
WCheck the volume capacity.You cannot set a pair because the
number of cylinders is different for each.
Make sure that the capacity is the same
for both.
85197105
WSpecify the volume with the same
emulation type, and retry the operation.
You cannot set a pair, because the
volume type is different for each.
85207105
WCheck the contents, and retry.The number of multiple copy jobs
exceeded the maximum.
85217105
WSpecify the supported emulation type.The emulation type of the S-VOL is not
supported.
85227105
WSpecify the supported emulation type.The emulation type of the T-VOL is not
supported.
85237105
WSpecify the supported emulation type.The emulation type is not supported.85247105
EPlease contact HP Technical Support.An internal logic error occurred.85257105
EPlease contact HP Technical Support.An internal logic error occurred.85267105
EPlease contact HP Technical Support.An internal logic error occurred.85277105
EPlease contact HP Technical Support.An internal logic error occurred.85287105
242 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English