HP StorageWorks P9000 - Disk Arrays User Manual

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe requested operation cannot be
performed. Check the status of the
specified volume.
The command has been rejected
because the issued request is an
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
580047105
WDelete the Remote Copy pair or execute
the operation by other pairs.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Remote Copy pair.
582597105
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the Business Copy for
Mainframe Systems User Guide for the
relation between the state of Continuous
Access Synchronous Z pair and the
Business Copy Z operations.
The command has been rejected,
because the specified S-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
582607105
WThe requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the Business Copy for
Mainframe Systems User Guide for the
relation between the state of Continuous
Access Synchronous Z pair and the
Business Copy Z operations.
The command has been rejected,
because the specified S-VOL is used as
R-VOL of Continuous Access Synchronous
Z pair.
582617105
EPlease add sufficient shared memory to
create a pair.
A pair cannot be created because
shared memory for differential tables is
insufficient.
582627105
WCheck the requirements for using the
volume with Continuous Access Journal
Z.
The operation failed because the
specified S-VOL was a data volume of
Continuous Access Journal Z. Check the
requirements for using the volume with
Continuous Access Journal Z.
582997105
WRelease the Continuous Access Journal
Z setting or specify another volume.
The operation failed, because the
specified T-VOL was a data volume of
Continuous Access Journal Z.
583007105
WRelease the Continuous Access Journal
Z setting or specify another volume.
The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal Z.
583017105
iDelete the Continuous Access Journal Z
pair or execute the operation by other
pairs.
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal Z
pair.
583517105
iTo continue the operation, release the
Continuous Access Journal Z pair or the
Continuous Access Synchronous Z pair,
and retry the operation.
The command was rejected, because the
specified volume was used by
Continuous Access Journal Z and
Continuous Access Synchronous Z.
583567105
WIf the problem persists despite retrying,
please contact HP Technical Support.
The disk subsystem is in internal process.
Please retry the operation.
584517105
Part code 7105 251

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English