HP StorageWorks P9000 - Disk Arrays User Manual

Table 85 Error codes (part code 9605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
A parameter error occurred.81289605
EIf this problem persists, please contact
HP Technical Support.
This error code is not registered.81329605
ETo change the attribute, please contact
HP Technical Support.
The attribute of this logical volume
cannot be changed to Read/Write.
81349605
WCheck the logical volume configuration,
then retry the operation.
This logical volume is already used as
an S-VOL for Remote Copy or Business
Copy.
81359605
WThe currently licensed capacity is
insufficient. To increase the licensed
capacity, buy a new license key.
The command was rejected, because the
licensed capacity was exceeded.
81369605
ETo release the Reserved setting, please
contact HP Technical Support.
The Reserved setting of the specified
volume cannot be released.
81389605
WCheck the volume, then retry the
operation.
The specified volume is a P-VOL for
Business Copy.
81399605
WCheck the volume, then retry the
operation.
This logical volume cannot be selected
because it is used as a reserve volume
for Auto LUN.
81419605
WCheck the logical volume, then retry the
operation.
You cannot select this logical volume
because it is used as a Continuous
Access Journal volume.
81429605
WCheck the logical volume, then retry the
operation.
You tried to set a retention term to a
logical volume whose access attribute is
not Read Only or Protect.
81509605
WTo shorten it, please contact HP
Technical Support.
The retention term of the logical volume
cannot be shortened.
81519605
WSpecify an open-systems volume.You cannot set a retention term to any
mainframe volumes.
81529605
WCorrect the retention term, then retry the
operation.
The specified retention term exceeds the
maximum.
81539605
WCheck the retention term of the logical
volume, then retry the operation.
The retention term of the logical volume
has been changed by RAID Manager.
81549605
WTo change the access attribute of the
logical volume to Read/Write, please
contact HP Technical Support.
You cannot change the access attribute
because a retention term is set to the
specified logical volume.
81559605
WSet the expiration lock to Disable, then
change the access attribute.
You cannot change the access attribute
because the expiration lock is set to
Enable.
81569605
WRetry the operation after the process is
completed.
The specified operation cannot be
executed because the LDEV shredding
or the LDEV format is being executed.
584049605
WSelect another volume.The attribute of the pool volume cannot
be changed.
584129605
WSelect another volume.The attribute of the virtual volume of the
Snapshot cannot be changed.
584139605
WSelect another volume.The attribute of the P-VOL or the S-VOL
of the Snapshot cannot be changed.
584149605
290 Message (part code group 9nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English