EasyManuals Logo
Home>HP>Storage>StorageWorks P9000 - Disk Arrays

HP StorageWorks P9000 - Disk Arrays User Manual

HP StorageWorks P9000 - Disk Arrays
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Table 21 Error codes (part code 0605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck whether the DKCMAIN microcode
version and the SVP microcode version
are mismatched.
This function is not supported.81020605
WWait for a while, then retry the
operation.
Another maintenance processing is in
progress.
81220605
WCheck the licensed capacity, then specify
it within the licensed capacity or add the
licensed capacity.
The command was rejected, because the
licensed capacity has exceeded the
maximum.
81360605
WRelease the configuration definition of
Compatible FlashCopy, then retry the
operation.
The configuration of Compatible
FlashCopy is defined.
81400605
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC side.89580605
EIf this problem persists, please contact
HP Technical Support.
An error occurred on the DKC side.89660605
WRestore more than one path to the
external volume, then perform the
operation of the external volume.
The operation of the external volume has
been failed because all the paths to the
external volume are blocked.
89790605
WCheck the emulation type. If you want to
change the cache segment size to set the
specified emulation type, please contact
HP Technical Support.
An emulation type that cannot be added
is specified.
565130605
WExecute the Disconnect External Storage
Systems or the Disconnect External
Volumes, then retry the operation.
The Disconnect External Storage Systems
or the Disconnect External Volumes is not
executed for the target volume.
565150605
WRelease the configuration definition of
Continuous Access Synchronous or
Continuous Access Synchronous Z, then
retry the operation.
The configuration of Continuous Access
Synchronous or Continuous Access
Synchronous Z is defined.
565160605
WRelease the configuration definition of
Business Copy, Business Copy Z, or
Snapshot, then retry the operation.
The configuration of Business Copy,
Business Copy Z, or Snapshot is defined.
565170605
WRelease the reserved volume setting for
Business Copy or Business Copy Z, then
retry the operation.
The reserved volume setting for Business
Copy or Business Copy Z is defined.
565190605
WRelease the reserved volume setting for
Auto LUN, then retry the operation.
The reserved volume setting for Auto LUN
is defined.
565200605
WRestore the blocked path status, then
retry the operation.
All the paths to the external volume are
blocked.
582580605
WMake the setting of the paths to keep at
least one path available, then retry the
operation.
No paths will be available, if you
change the setting of paths.
582630605
WExecute the Reconnect External Storage
Systems or the Reconnect External
Volumes, then retry the operation.
After executing the Disconnect External
Storage Systems or the Disconnect
External Volumes, neither the Reconnect
External Paths nor the Disconnect
External Paths can be executed.
583300605
WCheck the specified External Path.The specified External Path is not
registered.
583310605
Part code 0605 43

Table of Contents

Other manuals for HP StorageWorks P9000 - Disk Arrays

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks P9000 - Disk Arrays and is the answer not in the manual?

HP StorageWorks P9000 - Disk Arrays Specifications

General IconGeneral
BrandHP
ModelStorageWorks P9000 - Disk Arrays
CategoryStorage
LanguageEnglish

Related product manuals