HP StorageWorks P9000 - Disk Arrays User Manual

Table 25 Error codes (part code 1005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Invalid host mode.10211005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Invalid host mode.10221005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Invalid Fibre address.10231005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Invalid Fibre topology information.10241005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The specified LU path does not exist.10251005
WCheck the specified contents, then retry
the operation.
LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
10591005
WFirst, add paths, then click Apply. Next,
turn off the security switch, then click
Apply.
Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
10611005
WCheck the specified contents, then retry
the operation.
The specified WWN is already in use.10631005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
You are trying to register the same
WWN that is already registered.
10641005
WCorrect the specified contents, and
request the setting of the configuration
information again.
The specified host name or the host
group name is already registered. (The
host name and the host group name
cannot be the same.)
10651005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
WWN number, which is not registered,
is specified. (When deleting, or
changing)
10661005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
You are trying to register the same host
group number as the already registered
one.
10671005
WThe configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The specified host group has not been
registered.
10681005
54 Message (part code group 1nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English