Table 31 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait for a while, and retry.A maintenance operation is in progress.
For example:
• LDEV formatting is in progress
• Correction Copy is in progress
• Drive Copy is in progress
• The CHA/DKA status is changing
• The cache status is changing
• Replacement of an OEM drive
microprogram is in progress
• LDEV Shredding is in progress
Therefore the specified operation
cannot be executed.
20953005
WIf the Concurrent Copy or the Compatible
XRC operation is in progress in the target
volumes, cancel the Concurrent Copy
job or delete a Compatible XRC pair via
the host. If the Concurrent Copy or the
Compatible XRC operation is not in
progress in the target volumes, issue the
LISTSESS and LISTDVCS commands,
check the SESSION ID No., and
terminate SESSION by means of the
TERMSESS command.
The Concurrent Copy or the Compatible
XRC operation is in progress in the
target volumes.
22003005
WCheck the settings, then retry the
operation.
Processing cannot be performed
because of Data Retention settings.
22013005
WCheck the settings, then retry the
operation.
The specified volume cannot be
processed due to the effect of the
access attribute assigned by Volume
Retention.
22023005
WCheck the settings, then retry the
operation.
Processing cannot be performed
because of Volume Security for
Mainframe settings.
22033005
WDelete or suspend all pairs belonging to
journal volumes to be maintained.
Devices to be maintained include
journal volumes.
22043005
WDelete all pairs belonging to journal
volumes to be maintained.
Devices to be maintained include
journal volumes.
22053005
WShred or format the specified LDEV. If
the specified LDEV is Thin Provisioning
volume (V-VOL), recover the pool first.
The restore operation has been failed,
because the specified LDEV was not
shredded or formatted.
25113005
EPlease contact HP Technical Support.The restore operation has been failed,
because the system cannot access the
specified LDEV.
25123005
WRelease the pair definition or delete
command devices defined by Business
Continuity Manager, and then retry the
operation.
One of the following is defined: a
Remote Copy pair, a Continuous
Access Journal pair, or a Continuous
Access Journal Z pair. Alternatively,
command devices defined by Business
Continuity Manager are included.
25153005
Part code 3005 77
To Next Page
Loading...
Need help?
General