HP StorageWorks P9000 - Disk Arrays User Manual

Table 31 Error codes (part code 3005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSpecify another volume.The emulation type of the specified
volume is not OPEN-V.
555113005
WSpecify another volume.The specified volume is an external
volume.
555123005
WSpecify another volume.The specified volume is used as a
V-VOL.
555133005
WSpecify another volume.The specified volume is not configured.555143005
WInstall the program product.This function is not available, because
the program product is not installed.
555163005
WSpecify another volume.The specified volume is used as a
Pool-VOL.
555173005
WCheck the setting(s).The specified pool does not exist.555193005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555943005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563013005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563023005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
563033005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571013005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
571023005
WInstall the logical volume.The logical volume cannot be
registered, because it is not installed.
584603005
WRestore the blockade status of the logical
volume.
The specified operation cannot be
done, because the logical volume is
blocked.
584613005
WSpecify another logical volume.The logical volume cannot be
registered, because it is defined as a
Pool-VOL.
584623005
WMatch the CLPR number of the logical
volumes.
The specified logical volume cannot be
registered, because the CLPR number
of the volume does not match the
number of the logical volume already
registered to the Pool.
584633005
WSpecify another logical volume.The specified logical volume cannot be
registered, because it is a V-VOL.
584643005
WSpecify another logical volume.The volume set as a Command Device
cannot be set as a component of a
Pool-VOL.
584653005
WSpecify another logical volume.The specified logical volume cannot be
registered, because a LUN path is set
to the logical volume.
584663005
80 Message (part code group 3nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English