HPE FlexNetwork MSR Series - Display Wlan Wmm

98
display wlan wmm
Use display wlan wmm radio to display WMM statistics for radios.
Use display wlan wmm client to display WMM statistics for clients.
Syntax
display wlan wmm { radio { all | ap ap-name } | client { all | ap ap-name | mac-address
mac-address } }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all radios or all clients.
ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. The string
can contain letters, digits, underscores (_), left brackets ([), right brackets (]), forward slashes (/), and
spaces.
mac-address mac-address: Specifies a client by its MAC address in the H-H-H format.
Examples
# Display WMM statistics for radios of AP test.
<Sysname> display wlan wmm radio ap test
AP ID : 4 AP name : test
Radio : 1
Client EDCA updates : 0
QoS mode : WMM
WMM status : Enabled
Radio max AIFSN : 15 Radio max ECWmin : 10
Radio max TXOPLimit : 32767 Radio max ECWmax : 10
CAC information
Clients accepted : 0
Voice : 0
Video : 0
Total request mediumtime(µs) : 0
Voice(µs) : 0
Video(µs) : 0
Calls rejected due to insufficient resources : 0
Calls rejected due to invalid parameters : 0
Calls rejected due to invalid mediumtime : 0
Calls rejected due to invalid delaybound : 0
Radio : 2
Client EDCA updates : 0
QoS mode : WMM
WMM status: Disabled