64
Views
System view
Predefined user roles
network-admin
Parameters
mac-address mac-address: Specifies a client by its MAC address.
Usage guidelines
If you add an online client to the static blacklist, the command logs off the client.
You cannot add a client to both the whitelist and the static blacklist.
The undo form of the command removes all clients from the static blacklist if you do not specify the
mac-address mac-address option.
Examples
# Add MAC address 001c-f0bf-9c92 to the static blacklist.
<Sysname> system-view
[Sysname] wlan static-blacklist mac-address 001c-f0bf-9c92
Related commands
display wlan blacklist
wlan whitelist mac-address
Use wlan whitelist mac-address to add a client to the whitelist.
Use undo wlan whitelist mac-address to remove a client from the whitelist.
Syntax
wlan whitelist mac-address mac-address
undo wlan whitelist [ mac-address mac-address ]
Default
No clients exist in the whitelist.
Views
System view
Predefined user roles
network-admin
Parameters
mac-address mac-address: Specifies a client by its MAC address.
Usage guidelines
When you add the first client to the whitelist, the system asks you whether to disconnect all online
clients. Enter Y at the prompt to configure the whitelist.
If you remove an online client from the whitelist, the command logs off the client. If you remove all
clients from the whitelist, online clients will not be logged off.
You cannot add a client to both the whitelist and the static blacklist.
The undo form of the command removes all clients from the whitelist if you do not specify the
mac-address mac-address option.
To Next Page
Loading...
Need help?
General
