HPE FlexNetwork MSR Series - Reset Wlan Client; Reset Wlan Dynamic-Blacklist

54
Predefined user roles
network-admin
Parameters
A locked region code cannot be changed.
Examples
# Lock the global region code.
<Sysname> system-view
[Sysname] wlan global-configuration
[Sysname-wlan-global-configuration] region-code-lock enable
Related commands
region-code
reset wlan client
Use reset wlan client to log off a client or all clients.
Syntax
reset wlan client { all | mac-address mac-address }
View
User view
Predefined user roles
network-admin
Parameters
all: Specifies all clients.
mac-address mac-address: Specifies a client by its MAC address.
Examples
# Log off all clients.
<Sysname> reset wlan client all
Related commands
display wlan client
reset wlan dynamic-blacklist
Use reset wlan dynamic-blacklist to remove the specified client or all clients from the dynamic
blacklist.
Syntax
reset wlan dynamic-blacklist [ mac-address mac-address ]
Views
User view
Predefined user roles
network-admin