70
key-derivation
Use key-derivation to set the key derivation function (KDF).
Use undo key-derivation to restore the default.
Syntax
key-derivation { sha1 | sha1-and-sha256 | sha256 }
undo key-derivation
Default
The KDF is the HMAC-SHA1 algorithm.
Views
WLAN service template view
Predefined user roles
network-admin
Parameters
sha1: Specifies the HMAC-SHA1 algorithm as the KDF.
sha256: Specifies the HMAC-SHA256 algorithm as the KDF.
sha1-and-sha256: Specifies the HMAC-SHA1 algorithm and the HMAC-SHA256 algorithm as the
KDFs.
Usage guidelines
KDFs take effect only for a network that uses the RSNA mechanism.
The HMAC-SHA256 algorithm is recommended if mandatory management frame protection is
enabled.
Examples
# Configure the HMAC-SHA256 algorithm as the KDF.
<Sysname> system-view
[Sysname] wlan service-template 1
[Sysname-wlan-st-1] key-derivation sha256
Related commands
akm mode
cipher-suite
security-ie
pmf
Use pmf to enable management frame protection.
Use undo pmf to restore the default.
Syntax
pmf { mandatory | optional }
undo pmf
Default
Management frame protection is disabled.
To Next Page
Loading...
Need help?
General
