HPE FlexNetwork MSR Series - Service-Template; Service-Template Enable

55
Parameters
mac-address mac-address: Specifies a client by its MAC address. If you do not specify this option,
the command removes all clients from the dynamic blacklist.
Examples
# Remove all clients from the dynamic blacklist.
<Sysname> reset wlan dynamic-blacklist
# Remove the specified client from the dynamic blacklist.
<Sysname> reset wlan dynamic-blacklist mac-address b8ca-32a2-df69
Related commands
display wlan blacklist
service-template
Use service-template to bind a service template to a radio interface.
Use undo service-template to unbind a service template from a radio interface.
Syntax
service-template service-template-name
undo service-template service-template-name
Default
No service template is bound to a radio interface.
Views
WLAN-Radio interface view
Predefined user roles
network-admin
Parameters
service-template-name: Specifies a service template by its name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
Before you bind a service template to a radio or a radio interface, you must create the service
template.
Examples
# Bind service template service1 to interface WLAN-Radio 0/1.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-wlan-radio-1] service-template service1
service-template enable
Use service-template enable to enable a service template.
Use undo service-template enable to disable a service template.
Syntax
service-template enable