93
mac-authentication max-user
Use mac-authentication max-user to set the maximum number of concurrent MAC authentication
clients on a service template.
Use undo mac-authentication max-user to restore the default.
Syntax
mac-authentication max-user count
undo mac-authentication max-user
Default
A maximum of 4096 concurrent MAC authentication clients are allowed on a service template.
Views
Service template view
Predefined user roles
network-admin
Parameters
count: Specifies the maximum number of concurrent MAC authentication clients. The value range for
this argument is 1 to 4096.
Usage guidelines
This command is configurable when the service template is disabled, and it takes effect after the
service template is enabled.
When the maximum number is reached, the service template denies subsequent MAC
authentication clients.
Examples
# Configure service template service1 to support a maximum of 32 concurrent MAC authentication
clients.
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] mac-authentication max-user 32
To Next Page
Loading...
