11
Examples
# Enable 802.11n protection.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] dot11n protection enable
Related commands
protection-mode
dot11n support maximum-mcs
Use dot11n support maximum-mcs to set the maximum supported MCS index.
Use undo dot11n support maximum-mcs to restore the default.
Syntax
dot11n support maximum-mcs index
undo dot11n support maximum-mcs
Default
The maximum supported MCS index is 76.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
index: Specifies the maximum supported MCS index in the range of 0 to 76.
Usage guidelines
This command is applicable only to 802.11n radios. Changing the radio mode to 802.11a, 802.11b, or
802.11g invalidates the command.
The maximum supported MCS index cannot be smaller than the maximum mandatory MCS index.
Examples
# Set the maximum supported MCS index to 14.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] dot11n support maximum-mcs 14
dtim
Use dtim to set the Delivery Traffic Indication Map (DTIM) interval.
Use undo dtim to restore the default.
Syntax
dtim counter
undo dtim
To Next Page
Loading...
Need help?
General
