HPE FlexNetwork MSR Series Command Reference

9
[Sysname-WLAN-Radio0/1] dot11g protection enable
Related commands
protection-mode
dot11n mandatory maximum-mcs
Use dot11n mandatory maximum-mcs to set the maximum mandatory MCS index.
Use undo dot11n mandatory maximum-mcs to restore the default.
Syntax
dot11n mandatory maximum-mcs index
undo dot11n mandatory maximum-mcs
Default
No maximum mandatory MCS index is set.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
index: Specifies the maximum mandatory MCS index in the range of 0 to 76.
Usage guidelines
This command is applicable only to 802.11n radios. Changing the radio mode to 802.11a, 802.11b, or
802.11g invalidates the command.
Before configuring the dot11n multicast-mcs command, you must set the maximum mandatory
MCS index.
After you modify the maximum mandatory MCS index, clients that are associated with the radio and
that do not support the modified MCS index will go offline.
Examples
# Set the maximum mandatory MCS index to 14.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] dot11n mandatory maximum-mcs 14
dot11n multicast-mcs
Use dot11n multicast-mcs to set the multicast MCS index.
Use undo dot11n multicast-mcs to restore the default.
Syntax
dot11n multicast-mcs index
undo dot11n multicast-mcs
Default
No multicast MCS index is set.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English