HPE FlexNetwork MSR Series - Green-Energy-Management; Ldpc

13
Examples
# Set the fragmentation threshold to 2048 bytes.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-wlan-radio0/1] fragment-threshold 2048
green-energy-management
Use green-energy-management enable to enable the energy-saving feature.
Use green-energy-management disable to disable the energy-saving feature.
Use undo green-energy-management to restore the default.
Syntax
green-energy-management { disable | enable }
undo green-energy-management
Default
The energy saving feature is disabled.
Views
Radio interface view
Predefined user roles
network-admin
Usage guidelines
This command is applicable only to 802.11n radios. Changing the radio mode to 802.11a, 802.11b, or
802.11g invalidates the command.
After you enable the energy-saving feature, the multiple-input and multiple-output (MIMO) mode of a
radio automatically changes to 1x1 if no clients associate with the radio. This reduces power
consumption.
Examples
# Enable the energy-saving feature.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] green-energy-management enable
ldpc
Use ldpc enable to enable LDPC.
Use ldpc disable to disable LDPC.
Use undo ldpc to restore the default.
Syntax
ldpc { disable | enable }
undo ldpc
Default
LDPC is disabled.