106
dot11b: Specifies the 802.11b radio mode.
dot11g: Specifies the 802.11g radio mode.
dot11gn: Specifies the 802.11gn radio mode.
bandwidth: Specifies the maximum bandwidth in Kbps. The value range varies as follows depending
on radio modes:
• 16 to 30000 for dot11a and dot11g.
• 16 to 250000 for dot11an and dot11gn.
• 16 to 500000 for dot11ac.
• 16 to 7000 for dot11b.
Usage guidelines
The maximum bandwidth is used to calculate the guaranteed bandwidth.
Examples
# Set the maximum bandwidth to 2000 Kbps for 802.11ac.
<Sysname> system-view
[Sysname] wlan max-bandwidth dot11ac 2000
wmm
Use wmm enable to enable WMM.
Use wmm disable to disable WMM.
Use undo wmm to restore the default.
Syntax
wmm { disable | enable }
undo wmm
Default
WMM is enabled.
Views
Radio interface view
Predefined user roles
network-admin
Usage guidelines
All 802.11n clients must support WLAN QoS. For 802.11n clients to communicate with the
associated AP, enable WMM when the radio operates in 802.11an or 802.11gn mode.
Examples
# Disable WMM.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] wmm disable
wmm edca client (ac-be and ac-bk)
Use wmm edca client to set EDCA parameters of AC-BE or AC-BK queues for clients.
To Next Page
Loading...
Need help?
General
