87
display wlan client-security block-mac
Use display wlan client-security block-mac to display blocked MAC address information for
WLAN clients.
Syntax
display wlan client-security block-mac
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
A MAC address that fails authentication is added to the blocked MAC address list when the intrusion
protection action is temporary-block.
Examples
# Display information about all blocked MAC addresses.
<Sysname> display wlan client-security block-mac
MAC address AP ID RADIO ID BSSID
0002-0002-0002 1 1 00AB-0DE1-0001
000d-88f8-0577 1 1 0EF1-0001-02C1
Total entries: 2
Table 10 Command output
Field Description
MAC address Blocked MAC address, in the format of H-H-H.
AP ID AP ID of the blocked MAC address.
RADIO ID Radio ID of the blocked MAC address.
BSSID BSS ID of the blocked MAC address, in the format of H-H-H.
Total entries Number of blocked MAC addresses.
Related commands:
client-security intrusion-protection action
client-security intrusion-protection timer temporary-block
dot1x domain
Use dot1x domain to specify an authentication domain for 802.1X clients on a service template.
Use undo dot1x domain to restore the default.
Syntax
dot1x domain domain-name
undo dot1x domain
To Next Page
Loading...
Need help?
General
