95
Default
A service template does not have a guaranteed bandwidth.
Views
Radio interface view
Predefined user roles
network-admin
Parameters
service-template service-template-name: Specifies a service template by its name, a
case-insensitive string of 1 to 63 characters. Make sure the specified service template has been
bound to the radio.
percent percent: Specifies the percentage of the guaranteed bandwidth to the total bandwidth. The
value range for the percent argument is 1 to 100. The total bandwidth represents the maximum
bandwidth of the radio. The guaranteed bandwidth represents the minimum bandwidth for the BSS
corresponding to the service template.
all: Specifies all service templates.
Usage guidelines
For this command to take effect, make sure the bandwidth guaranteeing feature is enabled.
For all service templates bound to the same radio, the sum of the guaranteed bandwidth
percentages cannot exceed 100%.
Examples
# Set the guaranteed bandwidth percentage to 30% for service template 1.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] service-template 1
[Sysname-WLAN-Radio0/1] bandwidth-guarantee enable
[Sysname-WLAN-Radio0/1] bandwidth-guarantee service-template 1 percent 30
Related commands
bandwidth-guarantee
wlan max-bandwidth
cac policy
Use cac policy to configure a Connect Admission Control (CAC) policy.
Use undo cac policy to restore the default.
Syntax
cac policy { channelutilization [ channelutilization-value ] | client [ client-number ] }
undo cac policy
Default
The client-based admission policy is used, and the maximum number of admitted clients is 20.
Views
Radio interface view
To Next Page
Loading...
Need help?
General
