HPE FlexNetwork MSR Series Command Reference

56
undo service-template enable
Default
A service template is disabled.
Views
Service template view
Predefined user roles
network-admin
Usage guidelines
If the number of BSSs on an AC exceeds the limit, you cannot enable a new service template.
Examples
# Enable service template service1.
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] service-template enable
snmp-agent trap enable wlan client
Use snmp-agent trap enable wlan client to enable SNMP notifications for WLAN access.
Use undo snmp-agent trap enable wlan client to disable SNMP notifications for WLAN access.
Syntax
snmp-agent trap enable wlan client
undo snmp-agent trap enable wlan client
Default
SNMP notifications are disabled for WLAN access.
Views
System view
Predefined user roles
network-admin
Usage guidelines
To report critical WLAN access events to an NMS, enable SNMP notifications for WLAN access. For
WLAN access event notifications to be sent correctly, you must also configure SNMP on the device.
For more information about SNMP configuration, see the network management and monitoring
configuration guide for the device.
Examples
# Enable SNMP notifications for WLAN access.
<Sysname> system-view
[Sysname] snmp-agent trap enable wlan client
ssid
Use ssid to set an SSID for a service template.
Use undo ssid to restore the default.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English