HPE FlexNetwork MSR Series Command Reference

48
Field Description
• Mandatory—Management frame protection in mandatory mode is
enabled.
Forward policy status
WLAN forwarding policy status:
• Disabled.
• Enabled.
FT status
FT status:
• Disabled.
• Enabled.
QoS trust
QoS priority trust mode:
• Port—Port priority trust mode.
• Dot11e—802.11e priority trust mode.
QoS priority Port priority in the range of 0 to 7.
display wlan statistics
Use display wlan statistics to display client statistics or service template statistics.
Syntax
display wlan statistics { client [ mac-address mac-address ] | service-template
service-template-name [ connect-history ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
client: Specifies client statistics.
mac-address mac-address: Specifies a client by its MAC address. If you do not specify this option,
the command displays statistics for all clients.
service-template service-template-name: Specifies a service template by its name. If you also
specify the connect-history keyword, the command displays the connection history for the specified
service template.
Examples
# Display statistics for all clients.
<Sysname> display wlan statistics client
MAC address : 0014-6c8a-43ff
AP name : ap1
Radio ID : 1
SSID : office
BSSID : 000f-e2ff-7700
RSSI : 31 dB
Sent frames:
Back ground : 0/0 (frames/bytes)

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English