47
Field Description
• Temporary-service-stop—Temporarily stops the access service
provided by the BSS that receives illegal packets.
Temporary block time Temporary block time in seconds.
Temporary service stop time Temporary service stop time in seconds.
Fail VLAN ID
ID of the VLAN to which clients are added if they cannot pass the
authentication when the authentication server can be reached. This field
displays
Not configured
if the fail VLAN ID is not configured.
802.1X handshake
Whether 802.1X handshake is enabled:
• Enabled.
• Disabled.
802.1X handshake secure
Whether secure 802.1X handshake is enabled:
• Enabled.
• Disabled.
802.1X domain
802.1X authentication domain. This field displays
Not configured
if the
domain is not configured.
MAC-auth domain
MAC authentication domain. This field displays
Not configured
if the
domain is not configured.
Max 802.1X users per BSS Maximum number of supported 802.1X users in a BSS.
Max MAC-auth users per
BSS
Maximum number of supported users that pass the MAC authentication in a
BSS.
802.1X re-authenticate
Whether 802.1X reauthentication is enabled:
• Enabled.
• Disabled.
Authorization fail mode
Authorization fail mode:
• Offline—Clients are logged off when authorization fails.
• Online—Clients are not logged off when authorization fails.
Accounting fail mode
Accounting fail mode:
• Offline—Clients are logged off when accounting fails.
• Online—Clients are not logged off when accounting fails.
Authorization
Authorization information:
• Permitted—Applies the authorization information issued by the
RADIUS server or the local device.
• Ignored—Ignores the authorization information issued by the RADIUS
server or the local device.
Key derivation
Key derivation type:
• SHA1—Uses the HMAC-SHA1 hash algorithm.
• SHA256—Uses the HMAC-SHA256 hash algorithm.
• SHA1-AND-SHA256—Uses the HMAC SHA1 and SHA256 hash
algorithm.
PMF status
PMF status:
• Disabled—Management frame protection is disabled.
• Optional—Management frame protection in optional mode is enabled.